Banner
NewsYou are here: Home > News > Content

Advantages and cleaning methods of non-negative pressure stainless steel water supply equipment

Edit:Muzhiquan-Guangzhou Guangyi Stainless Steel Products Co., Ltd.  PublicDate:2019-05-24

Everyone knows that most of the non-negative pressure stainless steel water supply equipment provides normal water supply for residents. Since it is a normal living water supply, it will definitely be consumed. Since there is drinking, it is inseparable from disinfection. There must be steps and preparations before disinfection. Today we will talk about the advantages and cleaning methods of non-negative pressure stainless steel water supply equipment.


Non-negative pressure stainless steel water supply equipment


Technical advantages of non-negative pressure stainless steel water supply equipment:

1. Energy-saving: no negative pressure stainless steel water supply equipment can make full use of the pressure of the municipal pipe network to superimpose the pressure, how much is the difference;

2. Non-negative pressure stainless steel water supply equipment: The pressurized water tank structure adopts a fully enclosed design. The venting hole adopts a reciprocating suction and exhaust filter device to effectively filter dust and debris. The water tank is equipped with a water guiding device to effectively increase the water intake area and ensure the water intake area. The fresh water quality solves the problem of the water tank retention layer and the stagnant water layer;

3. The non-negative pressure stainless steel water supply equipment is uniquely configured: the water tank is equipped with an intelligent supercharging device to ensure that the pressure of the user pipe network is stable after the pump is switched, the water pump is in the high efficiency zone, and the time controller is added in the control system. Recycling the water source of the water tank to ensure the water quality in the water tank is fresh;

4. Non-negative pressure stainless steel water supply equipment has high safety: when the municipal pipe network stops the water or the user water consumption peak continues for a long time, the water supply is ensured by the pressurized water tank, which improves the water reliability;

5. Advanced control of non-negative pressure stainless steel water supply equipment: establish remote monitoring system and dynamically control equipment operation at any time;

6, no negative pressure stainless steel water supply equipment for a wide range of applications: for all areas that require secondary pressurized water supply.


Preparation of non-negative pressure stainless steel water supply equipment before disinfection

1. Everything has a contractual relationship, and disinfection is no exception. Before the disinfection, it is necessary to sign a “No Negative Pressure Stainless Steel Water Supply Equipment Cleaning and Disinfection Contract”.

2. Before disinfection, it is necessary to check the disinfection facilities, tools and clothing to meet the hygiene standards, and design the disinfection plan. At the same time, the notice of the water stop notice is posted in the local publicity column.

3. The required light source must be below the 36V safe voltage when working in the water tank.

Non-negative pressure stainless steel water supply equipment


Matters needing attention in cleaning and disinfecting non-negative pressure stainless steel water supply equipment

1. First clean the sanitation around the equipment to ensure a clean and tidy environment.

2. Under the premise of preventing the operator from getting an electric shock, it is necessary to ensure that the various electrical control systems are in a safe state and to monitor the electrical equipment.

3. Check the safety level of the ladder inside and outside the water supply equipment and whether all the valves of the equipment are turned on and off.

4. In the process of cleaning and disinfection, if there is a bad ventilation effect, there must be a measure to send and remove air.

5, disinfection personnel must have a safe protective measure for themselves, must be equipped with clean clothing, eye masks and masks after disinfection.

6. Discharge the water in the water supply equipment, then eliminate the dirt and sediment in the equipment, and finally do the rust removal treatment, and re-do the anti-corrosion layer without leaving a dead angle.

7. Closed disinfection should be used throughout the whole process. The mixing time of chlorine and water should not exceed 30 minutes. The chemicals used for disinfection must comply with national regulations. The use and ratio of pharmaceuticals should also strictly abide by the regulations.

8. Cleaning and disinfecting personnel should cooperate with the management personnel of non-negative pressure stainless steel water supply equipment, open the inlet valve to fill the water tank, cover the water tank manhole cover and lock it.

9. The manager should supervise the whole process of cleaning and disinfection to ensure the safety of the staff under the premise of ensuring the quality.

10. After the secondary water supply equipment is cleaned, the water sample should be sent to the health department and a water quality monitoring report should be provided.

 

The company's non-negative pressure stainless steel water supply equipment cleaning organization has passed the audit of the Water Affairs Bureau organization with good results every year. Therefore, when you choose this company, you can come to the company for inspection and review, and it is also very welcome.